How to Connect a CD player to a home stereo or surround sound receiver

How To Connect A Cd Player To A Receiver. How To Connect a CD Player to a Soundbar? If you are using a portable CD player, plug the 3.5 mm end of the "Y" cable into the headphone jack For instance, there will be a "CD" input for your CD player

Hook up your CD Player to your Home Stereo or Surround Sound Receiver If you're using an analog cable, the red ends will plug into the red holes, and the white ends will plug into the white holes.

Install a CD drive YouTube

Ideally, you will connect it to a jack labeled "CD In." You can connect it to just about any jack as long as you set the machine to the correct input A composite video cable (typical with yellow RCA plugs) works fine to connect a coax output to a receiver If you're using an analog cable, the red ends will plug into the red holes, and the white ends will plug into the white holes.

How to connect a CD player. To connect the music source to the receiver, you need to use a cable on your amp, find what audio inputs it has, and if they match the type of your CD player's outputs, then simply get a cable from one to the other, and select that input if your amp has more than one input and has an input selector.

How To Connect A Cd Player. Select Auxiliary input on the receiver if that is where you connected the EQ. If you have a digital home theater receiver (digital as in digital processing, meaning it has the Dolby Digital logo on the front) then you can connect your CD player to one of the digital inputs on the back and use the receiver's built-in DAC.